All-Purpose Sealer For All Surface Types

Features & Benefits

• Easy to reapply, no stripping required
• UV stable - Does not change color over time
• Makes metals significantly more smudge resistant, greatly reduces water spots
• Prevents marking on china and toilet bowls
• Will block oil and staining from vehicles, leaves and animals
• Penetrates into the substrate, does not create a film that can flake off
• Natural, low sheen finish
• Densifies existing material increasing surface hardness to approximate a ceramic level of protection
• Completely waterproof, water molecules cannot penetrate through the coating film
• Breathable - allows the substrate to naturally release moisture

How To Apply

• • Clean surface with standard cleaner and finish with isopropyl or denatured alcohol
  • Spray, wipe, roll or brush All Purpose Sealer onto substrate at recommended yield, spraying provides the most consistent finish. Wipe with a micro-fiber to smooth the material.
  • Repeat steps until desired finish is achieved (typical maximum is 3 coats)
  • Allow for overnight cure before use or traffic
  • Do not allow surface to be saturated with water for 12 hours, this includes rain or dew (after 1 hour surface can be covered with plastic)

Maintenance

• Use non-acidic cleaner every 6-12 months to refresh the surface

Surface Area Coverage

1-GALLON = 768 sq.ft. (1200-1400 sq.ft. based on smooth metal)
16-OUNCE = 96 sq.ft. (6 sq.ft. per oz on smooth metal)
8-OUNCE = 48 sq.ft.
4-OUNCE = 24 sq.ft.