10% Discount on your 1st purchase. Use code SEAL10 at checkout.

Ninja Sealers

Transform, Protect, and Beautify Every Surface

State-of-the-art sealing solutions for every surface in your home or business.

Color-Changing Tile & Grout Sealer

Color-Changing Tile and Grout Sealer. Natural, low sheen finish. Change the color of your tile with ultra-hard, abrasion resistant, chemical resistant tile sealer. Comes in colored or clear. Will change tile and grout color.

Price range: $99.99 through $979.99

Features & Benefits

  • Highly abrasion resistant, 9H ceramic hardness - Can be used on floors and will not abrade with normal use
  • Anti-microbial and bacteria resistant
  • Natural, low sheen finish, stays looking newer for longer
  • Easy to reapply, no stripping required
  • UV stable - Does not change color over time
  • Will block staining from food, oils, vehicles, tire pick-up, leaves and animals
  • Solvent borne, low-VOC
  • Densifies grout, increasing surface hardness to approximate a ceramic level of protection
  • Completely waterproof, water molecules cannot penetrate through the coating film
  • Breathable - allows the wood to naturally release moisture

How To Apply

    • Bring existing tile surface condition and appearance to desired level which may include light pressure cleaning
    • Clean surface with tile and grout cleaners to remove oils, grease and other surface contaminants
    • Clean surface with isopropyl or denatured alcohol for final pass
    • Spray, wipe or roll Color-Changing Tile and Grout Sealer onto surface at recommended yield - Spraying will provide best possible finish and appearance. When changing colors with deep tone contrast it may require two coats.
    • Allow for overnight cure before traffic
    • Do not allow surface to be saturated with water for 12 hours, this includes rain or dew (after 1 hour surface can be covered with plastic)

Maintenance

  • Use non-acidic tile and grout cleaner every 6-12 months to refresh the surface

Surface Area Coverage

1-QUART = 200 sq.ft. (yield with one coat)
1-GALLON = 800 sq.ft. (yield with one coat)
5-GALLON = 4000 sq.ft. (yield with one coat)

1 review for Color-Changing Tile & Grout Sealer

  1. Ninja Sealers Club

    “The color-changing sealer transformed my kitchen tiles. The new light grey color is beautiful and the application was a breeze.” – Sarah L.

Add a review