Poly Ceramic Garage Floor Sealer Kit

Features & Benefits

• Easy to reapply, no stripping required
• UV stable - Does not change color over time
• Blocks hot tire pick-up
• Will block oil and staining from vehicles, leaves and animals
• Penetrates into the substrate, does not create a film that can flake off
• Natural, low sheen finish
• Adds ceramic hardness to epoxy, greatly increasing scratch resistance
• Completely waterproof, water molecules cannot penetrate through the coating film

How To Apply

For Baseline Protection:

• Epoxy should be allowed to fully cure.
• Bring surface condition and appearance to desired level which may include light pressure cleaning
• Clean surface with masonry or concrete cleaners to remove oils, grease and other surface contaminants
• Spray, wipe, roll or brush Polyceramic Garage Floor Sealer onto surface at recommended yield, use micro-fiber mop to smooth the material over the surface.
• Allow for overnight cure before traffic
• Do not allow surface to be saturated with water for 12 hours

Robust Protection:

• New concrete should be allowed to cure for 28 days
• Bring surface condition and appearance to desired level which may include light pressure cleaning
• Clean surface with masonry or concrete cleaners to remove oils, grease and other surface contaminants
• Spray, wipe, roll or brush Polyceramic Garage Floor Sealer onto surface at recommended yield, use micro-fiber mop to smooth the material over the surface.
• Repeat steps until desired finish is achieved (typical maximum is 3 coats)
• Allow for overnight cure before traffic
• Do not allow surface to be saturated with water for 12 hours, this includes rain or dew (after 1 hour surface can be covered with plastic)

Maintenance

• Use non-acidic cleaner every 6-12 months to refresh the surface

Surface Area Coverage

1-Kit = 700-750 sq.ft.